外文论文格式跟中文的论文格式要求是一样的吗？这应该是同学们最常犹豫的问题了，外文论文格式规范到底是什么呢？今天学术参考网小编跟大家分享的这篇论文格式就是：外文论文格式！希望可以帮助到各位同学们，欢迎参考~
Your Paper39;s Title Starts Here: Please Center
use Helvetica (Arial) 14
First Author1, a, Second Author2,band Others3,c
1Full address of first author, including country
2Full address of second author, including country
3List all distinct addresses in the same way
aemail,bemail,cemail (corresponding author)
Keywords:List the keywords covered in your keywords will also be used by the publisher to produce a keyword index.
For the rest of the paper, please use Times Roman (Times New Roman) 12
Abstract.This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications
. The best is to read these instructions and follow the outline of this text.
Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches);
with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm(0.78 in).
We shall be able to publish your paper in electronic form on our web page
, if the paper format and the margins are correct.
Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind
when designing your figures and tables etc.
Intorduction
All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper.
Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications,they must ask the corresponding publishers to grant them the right to publish this material in their paper.
Organization of the Text
Section Headings.The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of thisparagraph).
Page Numbers.Do not number your paper.
Tables.Tables (refer with: Table 1, Table 2, ...) should be presented as part of the text, but in such
a way as to avoid confusion with the text. A descriptive title should be placed above each table. The caption should be self-contained and placed below or beside the table. Units in tables should be given in square brackets [meV]. If square brackets are not available, use curly {meV} or standard brackets(meV).
Special Signs.should always be written in with the fonts Times New Roman or Arial, especially
also in the figures and tables.
Macros. Do not use any macros for the figures and tables. (We will not be able to convert such
papers into our system)
Language.All text, figures and tables must be in English.
Figures.Figures (refer with: Fig. 1, Fig. 2, ...) also should be presented as part of the text, leaving enough space so that the caption will not be confused with the caption should be self-contained and placed below or beside the lly,only original drawings or photographic reproductions are acceptable. Only very good photocopies are acceptable. Utmost care must be taken to the figures in correct alignment with the text. Half-tone pictures should be in the form of glossy prints. If possible, please include your figures as graphic images in the electronic version. For best quality the pictures should have a resolution of 300 dpi(dots per inch)-
Color figures are welcome for the online version of the journal. Generally, these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.
Equations.Equations (refer with: Eq. 1, Eq. 2, ...) should be indented 5 mm (0.2"). There should be one line of space above the equation and one line of space below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number, e.g.
c2= a2+ b2.
(1)
Literature References
References are cited in the text just by square brackets [1]. (If square brackets are not available, slashes may be used instead, e.g. /2/.) Two or more references at a time may be put in one set of brackets [3,4]. The references are to be numbered in the order in which they are cited in the text and are to be listed at the end of the contribution under a heading References, see our example below.
Summary
On your CD, please indicate the format and word processor used. Please also provide your phone number, fax number and e-mail address for rapid communication with the publisher. Please always send your CD along with a hard copy that must match the CD’s content exactly. If you follow the foregoing, your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.
References
Reference an article:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun. 163 (2000) 51-59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979.
Reference to a chapter in an edited book:
[3] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 1999, pp.281-304.
[4] R.J. Ong, J.T. Dawley and P.G. Clem: submitted to Journal of Materials Research (2003)
[5] P.G. Clem, M. Rodriguez, J.A. Voigt and C.S. Ashley, U.S. Patent 6,231,666. (2001)
[6] Information on